News

  • 0
  • 0

Global nitride powder market trend 2023-2028 What are Nitrides? by Newsnewsmild

Wholesale gas prices in the Netherlands and the UK have risen 20 percent recently amid concerns about Russian supplies.

The EU plans to cut its dependence on Russian gas by two-thirds this year and stop importing Russian fossil fuels by 2027. Russia exported about 155 billion cubic meters of gas to the EU in 2021.

The US recently said it would try to supply 15bn cubic meters of LNG to the EU this year. U.S. LNG plants are running at full capacity, and analysts say much of the extra gas the U.S. sends to Europe comes from what should have been exported elsewhere.

The German government called Russia "an unreliable energy supplier". Even though the German government claimed that they have been preparing for the situation for a long time that Russia may stop sending gas one day, experts say it is hard for the EU to replace all of Russia's gas exports any time soon.

The supply and prices of many nitride powder will continue to be influenced by international situations.


Nitrides are binary compounds of nitrogen with other elements, including metallic nitrides, nonmetallic nitrides, and ammonia (which is customarily excluded from nitrides as a special substance).
Metal nitrides are compounds of metal elements with nitrogen. Most of them are insoluble in water, high thermal stability, can be used as high temperature insulating materials, such as titanium nitride, tantalum nitride, vanadium nitride and so on. A few are hydrolyzed completely in water to form metal hydroxide and release ammonia, such as magnesium nitride, aluminum nitride and so on.
Many metal nitride and non-metal nitride have high hardness, high melting point, high chemical stability, wear resistance, corrosion resistance and other characteristics. The hardness of some of these nitrides, such as cubic boron nitride and wurtzite boron nitride, has approached or even exceeded that of diamond. However, diamond cannot be widely used in many industrial fields because its carbon structure is unstable in high temperature environment, and it is easy to react with oxygen and combine with iron. Therefore, people focus on nitride.

Metallic Nitrides
Unlike oxides, most nitrides do not occur in nature but are synthetic products.
Aluminum nitride (AlN), for example, is a diamond-like nitride first synthesized in 1877. It can withstand 2200℃ high temperature, and the strength decreases slowly with the increase of temperature, has good thermal conductivity, thermal expansion coefficient is small, so it is a good heat resistant impact material. Aluminum nitride is an ideal crucible material for casting pure iron, aluminum or aluminum alloys because of its strong resistance to molten metal erosion. Aluminum nitride is also an electrical insulator with good dielectric properties and can be used as electrical components. It has high heat transfer ability and is widely used in microelectronic components. In addition, aluminum nitride is also used in optoelectronic engineering, including as an inducible layer in optical storage interfaces and electronic substrates, as a wafer carrier with high thermal conductivity, and for military applications.
For example, manganese nitride, as an alloy additive of nitrogen and manganese, is mainly used in the production of special alloy steel, high strength steel, stainless steel, heat-resistant steel and other products, especially in the transportation of oil and gas large diameter steel pipe and shipbuilding and automobile high strength steel, showing a good market prospect. Nitrogen can improve the strength and plasticity of steel, expand the austenite zone (austenite is a structure that can exist stably at a high temperature of more than 727℃, with special physical properties), refine grain, and improve machining performance. Manganese nitride can replace part of nickel to reduce the cost. It is characterized by high content of main elements, low content of harmful impurities such as phosphorus, and high utilization rate of nitrogen after adding into the melt.
At present, many metal nitrides have formed a series of products, including manganese nitride, vanadium nitrogen alloy (vanadium nitride, V(cN)), titanium and chromium nitride (Ti(cN), Cr(cN)), titanium nitride, gallium nitride, indium nitride and so on. The nanostructure of indium nitride is the basic material for developing related quantum devices.

Nonmetallic Nitrides
There are also some important nonmetallic nitrides, such as boron nitride (BN), triphosphorus pentaitride (P3N5), trisilicon tetrachitride (Si3N4) and so on, their thermal stability is relatively high, each with its own characteristics.
Silicon nitride, especially hot-pressed silicon nitride, is one of the hardest substances in the world. It is very high-temperature resistant, and its strength can stay the same even under the high temperature of 1200℃. After heating it will not melt into a melt body, until 1900℃ it will decompose. It has amazing chemical-corrosion resistance properties, it is resistant to almost all inorganic acid and some caustic soda solution, also can withstand a lot of organic acid corrosion; It is also a kind of high performance electrical insulation material.
Cubic boron nitride is an excellent lubricant. Hexagonal boron nitride can be used to make turning tools and drills because of its high hardness. Silicon nitride, boron nitride, silicon nitride can also be used to produce high-performance ceramics.
Although wurtzite boron nitride is difficult to make into large structures in experimental environments, the granular, high-temperature-resistant nitride superhard material can be coated on missiles, tanks, burrows, body armor and even kitchen knives.

Nitrides Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality nitride powder, please feel free to contact us and send an inquiry. ([email protected])

Europe has been facing the gas shortage problem since the second half of 2021. The worsening situation in Russia and Ukraine has reduced Russian gas shipments to Europe, leading to a doubling of European gas prices. Energy shortages have sent electricity prices soaring. For these reasons, it is predicted that the price of the nitride powder will continue to increase.

Inquery us

NEXT NEWS

Our Latest News

Global natural graphite market trend 2022-2028 How to know natural graphite? by Newsnewsmild

Natural graphite is a refractory material with a high melting point of 3650 °C, and it is a good conductor of heat and electricity.…

Global Mg3N2 powder market trend 2025-2028 How to Produce Magnesium Nitride? by Newsnewsmild

A tanker carrying 650,000 barrels of Venezuelan crude oil is reportedly bound for Europe, the first time Venezuela has exported crude to Europe in the past two years under US sanctions. It is analyzed that the U.S. is making up for the European ener…

Global Inconel 718 Alloy market trend 2023-2030 Properties and Applications of Inconel 718 Alloy by Newsnewsmild

Inconel 718 alloys is a precipitation-hardening nickel-iron-based superalloy containing niobium and molybdenum. Its microstructure is austenite and has excellent comprehensive properties.…