News

  • 0
  • 0

Global pce powder market trend 2022-2029 Why is polycarboxylate superplasticizer more suitable for modern concrete? by Newsnewsmild

The World Platinum Investment Association (WPIC) said recently that carmakers are accelerating reductions in palladium use and increased use of platinum due to concerns about Russian palladium supplies. However, it still expects a significant surplus in the platinum market this year.

Palladium is used by carmakers in tailpipe emissions systems to reduce carbon emissions.  While carmakers prefer palladium for catalytic converters, they are turning to platinum, which is cheaper than palladium, to save costs.

Russia accounts for about 25-30% of the world's palladium supply and 8-10% of its platinum supply.

There is no sign that western sanctions against Russia have restricted palladium exports since the conflict escalated in February, but as the conflict continues, more companies could boycott The Russian metal and governments could impose restrictions.

Platinum is currently trading at about $950 an ounce, about half the price of palladium.  Automakers use about 2.5 million to 3 million ounces of platinum and about 8.5 million ounces of palladium each year.

For the year as a whole, platinum supply will be 5 percent lower than in 2021 and demand 2 percent higher, with the automotive sector seeing a 16 percent increase due to increased light vehicle pce powder are still very uncertain.

Modern concrete is represented by ready-mixed concrete produced in industrialization, and pumping construction is the mainstream. Mechanical properties are no longer the only technical index of modern concrete, and the control of mixing and rheological properties is particularly important to ensure the construction. At the same time, the requirements to ensure the durability of concrete structures are increasing day by day. In the process of production and use, we should pursue the principle of sustainable development.

 

Technical characteristics of modern concrete

More complex components

The wide application of mineral admixtures mainly derived from industrial solid wastes diversifies the composition of cementitious materials, which is one of the main characteristics of modern concrete. Conventional mineral admixtures such as ground slag powder and fly ash have become important components of modern concrete, and functional mineral admixtures such as silica fume, ultra-fine stone powder, calcined kaolin and zeolite powder have also been applied in modern concrete. as mineral admixtures, various metallurgical and industrial tailings have been gradually applied to modern concrete. Chemical admixture represented by high-performance superplasticizer is another main feature of modern concrete. the emergence of high-performance superplasticizer greatly reduces the water-binder ratio of concrete, and the strength of concrete has been greatly improved. Ultra-high-strength concrete above C100 has achieved high-rise pumping construction. Some special materials are also gradually applied to modern concrete, such as expansive agent, fiber material, air entraining agent, consistency adjustment material, density adjustment material, durability reinforcement material and so on. In terms of concrete aggregate, high-quality natural aggregate resources are increasingly scarce, machine-made sand and low-grade aggregate have begun to enter the field of ready-mixed concrete, and the water absorption and mud content of aggregate are increasing. With the complexity and diversification of modern concrete components, the initial fluidity of concrete is greatly reduced and it is more difficult to maintain the fluidity of concrete.

 

Higher construction requirements

The complex structure and harsh construction environment of modern engineering require higher and higher fluidity of concrete. The construction of super high-rise, super-large volume and complex structure requires excellent pumping performance of concrete, and can realize self-compacting construction, so as to reduce labor intensity and ensure the compactness of concrete; long-distance transportation or long-time pouring requires a long time to keep concrete fluidity; nuclear power and hydropower projects require concrete fluidity to be stable and has little fluctuation over time. The super early strength project requires not only high early strength of concrete, but also long construction time; in harsh environment, especially in the high temperature environment above 40 , the hydration rate of cement is intensified, but concrete is still required to be pumped for construction after 3 hours. Therefore, high fluidity and fluidity, good and workability, and can achieve self-compaction is the fundamental to meet the requirements of modern concrete construction.

 

The problem of shrinkage cracking is more prominent.

The large amount of modern concrete cementitious materials, finer and finer cement, more and more complex components and lower water-binder ratio make the problem of shrinkage cracking more prominent. The simple pursuit of high profit to meet the strength makes the effect of cement through grinding aids become finer and finer, the specific surface area is as high as 420m2/kg, the hydration rate is accelerated, the hydration heat release rate increases, and the internal water consumption rate of concrete is too fast, and the development of high strength reduces the water-binder ratio to 0.18 and free water. The extensive use of ultra-fine mineral admixtures increases the shrinkage of concrete, increases the sensitivity of cracking, and makes concrete more prone to shrinkage cracks, thus reducing the frost resistance, carbonation resistance, corrosion resistance and so on. In addition, with the continuous expansion of the scope of human activities and the progress of construction technology, concrete projects in harsh environments such as dryness, cold and heavy corrosion are increasing day by day, and modern concrete is facing a harsher service environment than traditional concrete. the risk of cracking increases, and the problem of durability is more prominent.

 

Why is polycarboxylate superplasticizer more suitable for modern concrete?

The traditional lignin sulfonates, naphthalenesulfonic acid condensates and aliphatic superplasticizers have limited dispersion ability and low water reducing rate because of their inherent molecular structure. even if the content is increased, it is difficult to meet the requirements of high fluidity and fluidity of modern concrete under the condition of complex components and low water-binder ratio. Polycarboxylate admixture has flexible molecular structure and strong designability. Through targeted molecular construction, high performance and functionalization can be achieved to meet the different performance requirements of modern concrete, so as to improve the engineering quality.

 

Concrete Additives Supplier

TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality polycarboxylate superplasticizer, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


A spokesman for the Turkish presidential palace recently: the Black Sea Grain Export Joint Coordination Center may soon complete the final work of Ukraine's grain export route. The first ships carrying Ukrainian grain are expected to leave Ukraine's Black Sea port of Odessa on August 1 and re-export food to the international market. The grain ship will arrive in Istanbul, Turkey, as early as August 3, and then go to African countries.

Ukraine and Russia are both big grain exporters, among which Ukraine is known as the "granary of Europe". After the conflict between Russia and Ukraine broke out in February this year, grain exports of both countries were disrupted. The Ukrainian side accused the Russian army of blocking the Black Sea port on the Ukrainian side, resulting in more than 20 million tons of grain stranded in the port and unable to be transported by sea. The Russian side refutes this claim, accusing the Ukrainian side of laying a large number of mines in the waters near the port of the Black Sea, endangering navigation safety.

After coordination, Turkey, Russia, Ukraine and the United Nations Quartet signed an agreement in Istanbul on July 22 aimed at reopening blocked Black Sea transport routes. Ships carrying food can safely travel to and from three ports in southern Ukraine so that the stranded food of Ukraine can be transported to the international market. Russia and Ukraine agreed that neither side would attack ships carrying agricultural pce powder are still very uncertain.

Inquery us

Our Latest News

Global market trend 2023-2027 Sars-cov-2 variants from chronic COVID infection are of concern, which has an impact on the market for viral dna test kit by Newsnewsmild

European fertiliser companies, which rely on natural gas to produce key nutrients, are now having to cut back again. At least a quarter of Europe's nitrogen fertilizer production capacity has been lost, according to media reports. The International F…

Global chromium oxide market trend 2025-2028 Chromium Oxide Coatings by Newsnewsmild

Guotai Junan released a research report saying that under the background of carbon neutrality, the scarcity of coal mines is prominent, and the value of assets will continue to increase. The high point of capital expenditure in the coal industry appe…

Global market trend 2022-2029 The continued surge in French inflation is also having an impact on domino inkjet printing machine prices by Newsnewsmild

France's annual inflation rate hit 6.1 percent in July 2022, rising further from 5.8 percent in June, the highest since July 1985, the National Institute for Statistics and Economics (Insee) said.…